This is a brand new Yamaha Banshee airbox lid This will fit any year Yamaha Banshee 1987-2006. Brand new, factory OEM part - 2GU-14412-00-00 CAP,CLEANER CASE 1

This is a BRAND NEW 2006 - current Yamaha Raptor 700 700r factory OEM stock airbox lid only This is a factory OEM genuine Yamaha part.

This is a NEW OEM factory Banshee air intake system. You get the complete airbox with the carb boots - as seen in the photos It will fit any year Yamaha Banshee 1987-2006. The lid and filter are not included - but available in our other listings

This is a brand new Yamaha Banshee intake airbox It will fit any year Yamaha Banshee 1987-2006 This is factory OEM unit - directly from Yamaha 2GU-14421-00-00 or 2GU-14421-01-00

This is a BRAND NEW Vito's Performance oversized intake airbox boot for your Yamaha Blaster This is designed to use an oversized 33mm or 35mm carb on your Blaster and still use the factory airbox/rear fender uncut. Fits any year Yamaha Blaster: 1988-2006 This 2 piece unit is made of 3D printed RUBB

This is a BRAND NEW Yamaha Blaster airbox lid kit This is a genuine factory OEM Yamaha product from our local Yamaha dealership This includes:  OEM Yamaha lid / cover OEM Yamaha snorkel Vito's Performance clamp Fits any year Yamaha Blaster: 1988-2006 Ready to Install

This is a NEW OEM factory Warrior 350 air intake airbox This was purchased at our local Yamaha OEM dealership You get the complete airbox as seen in the photos The lid and filter are not included - but are available in our other listings fits: Yamaha Warrior 19878-2004 Yamaha Grizzly 600 1998-2001

This is a BRAND NEW Yamaha Blaster airbox intake tube duct joint This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006 Ready to Install

This is a BRAND NEW Yamaha Blaster airbox lid This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006   Ready to Install

This is a BRAND NEW Yamaha Blaster airbox lid snorkel + clamp This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006 Ready to Install Also includes a Vito's Performance clamp! 

This is a BRAND NEW Yamaha Blaster airbox lid snorkel This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006 Ready to Install

This is a NEW OEM factory Warrior 350 air intake airbox lid This was purchased at our local Yamaha OEM dealership You get the complete lid as seen in the photos fits: Yamaha Warrior 1987-2004 Yamaha Grizzly 600 1998-2001 Yamaha Wolverine 350 1995-2005

This is a brand new VITO's PERFORMANCE billet airbox adapter kit kit includes: Vito's Performance billet adapter plate + mounting hardware Vito's Performance K&N style filter + clamp Outerwear dust bag pre-filter This pro flow adapter eliminates a fatal flaw with the factory design, where dirt and

This is a brand new VITO's PERFORMANCE billet airbox

This is a brand new VITO's PERFORMANCE billet airbox intake adapter kit Kit includes: - Vito's Performance billet adapter plate + mounting hardware + o-ring seal - PRO DESIGN UNI foam filter + dual clamps or comprable (brand may also be Vito's Performance) - 2 stage design uses a pre-filter to

This is a pair of (2) Banshee rubber boot clamps These are the smaller airbox boot clamps that connect the airbox to the carbs (NOT the larger ones that hold the boots to the airbox) Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster 1988-2004)

This is a brand new VITO's PERFORMANCE billet airbox adapter for a factory airbox This pro flow adapter eliminates a fatal flaw with the factory design, where dirt and dust can creep in BEHIND your filter, and DESTROY your engine This is sized for a standard aftermarket UNI Pro Design FOAM PD-207 f

Brand New K&N style ATV Air Filter - fits factory airbox Pleated element style for more air flow More power and acceleration Washable and re-usable ID is 3 7/8" Fits the Yamaha ATV 4 stroke models listed below: 2004 - 2012 Yamaha YFZ450 2009 - Current Yamaha YFZ450R 2010 - 2011 Yamaha YFZ450X This

This is a brand new Yamaha Banshee intake airbox + lid It will fit any year Yamaha Banshee 1987-2006 This is factory OEM unit - directly from Yamaha Includes everything you need to complete an entire airbox! All 28 parts from Yamaha Includes, airbox, lid, snorkel, boots, clamps, clips, screws, se

This is a brand new K&N style air filter. Approx 4" oval, replaces K&N YA-3502 part This fit the Pro Design Pro Flow adapter for a K+N filter (will not fit small ones designed for foam filters) This is the one that you can reuse many times over, and just clean it and re-oil is every once

This is a BRAND NEW airbox joint duct for your Big Bear ATV This is a factory OEM original genuine parts from our local dealership In stock, and ready to ship from Michigan USA fits: 1987-1997 Yamaha Big Bear  1996 - 1998 Yamaha Big Bear 350 2WD (YFM350) 1987 - 1997 Yamaha Big Bear 3

This is a brand new air filter for a Yamaha Banshee from Vito's Performance This is the OEM factory stock style replacement that is the same as: 2GU-14451-00-00 Fits any year Yamaha Banshee 1987 - 2006 Flows the same amount of air as the Yamaha factory unit, so that means you will NOT NEED TO REJET

Yamaha Golf Cart airbox lid + gasket kit Fits: 1985 TO 1995 Yamaha golf carts: G2 G5 G8 G9 G11 OEM PART # J38-14412-02 VITOS PART # 50M-14462-01-00 This is a genuine Yamaha OEM factory lid + Vito's foam cord gasket seal In stock, ready to ship!

This is a BRAND NEW set of four (4) Banshee airbox wire clips These feed through the airbox, and secure the lid to the air box This is a direct replacement for OEM Yamaha part # 90465-18312-00 This will fit any year Yamaha Banshee 1987-2006

*** DOES NOT INCLUDE THE BOOTS This is a set of 4 BRAND NEW Yamaha Banshee 350 airbox carb rubber boot clamps Will fit any year Yamaha Banshee 1987-2006 These go between the air box and the carburetors 2 x large clamps 2 x small clamps These attach the boots to the airbox, and the boots

This is a BRAND NEW set of eight (8) Banshee airbox wire clips + clamps Includes 4 clamps for the airbox, and 4 clips for the lid These feed through the airbox, and secure the lid to the air box  This is a direct replacement for OEM Yamaha part # 90465-18312-00 and 90465-05184-00 This

This is a set of 2 BRAND NEW Vito's Performance airbox boot manifolds for a Yamaha Banshee The rubber boots connect larger aftermarket carbs to the stock airbox, including Mikuni & Keihin fits 33, 34, or 35 mm carbs These will fit any year Yamaha Banshee airbox, 1987-2006. Everything is still

This is a brand new Yamaha Banshee intake airbox + lid + Vitos air filter setup It will fit any year Yamaha Banshee 1987-2006 This is factory OEM unit - directly from Yamaha Includes everything you need to complete an entire airbox! All 28 parts from Yamaha Includes, airbox, lid, snorkel, boots, c

This is a pair of BRAND NEW Yamaha Banshee 350 airbox carb rubber boots + 4 clamps Will fit any year Yamaha Banshee 1987-2006 These go between the air box and the carburetors This listing is for 2 boots, you get both the left and the right These are BRAND NEW

This is a brand new OEM factory breather elbow tube for a Yamaha Raptor 660 or 700 This is a genuine OEM factory part from our local Yamaha dealership This will fit many different models, including: Bear Tracker Big Bear 250 Big Bear 400 Bruin FZR600 Grizzly 350 Grizzly 450 ...

This is a set of 2 BRAND NEW UPP Brand airbox boot manifolds for a Yamaha Banshee The rubber boots connect larger aftermarket carbs to the stock airbox, including Mikuni & Keihin fits 33, 34, or 35 mm carbs These will fit any year Yamaha Banshee, 1987-2006. Everything is still brand new in the pack

This is a BRAND NEW factory snorkel tube for a Yamaha Raptor 660 660R This is the left side This is a genuine OEM factory part directly form Yamaha - new in package In stock, ready to ship from Michigan, ...

This is a ...

This is a BRAND NEW set of Yamaha Banshee CHROME aftermarket SHEARER small bore in-frame drag pipe stinger tubes for the silencers You get both right and left sides These are for use with pod style filters (right off the carbs, no airbox) This is perfect if you have a set of pipes for use wit

This is a BRAND NEW Banshee airbox clip This will fit any year Yamaha Banshee 1987-2006. This is a factory OEM unit, brand new in Yamaha packaging These are what hold the OEM airbox lid to the main airbox, to secure a munting point to the airbox

This is a pair of 2 x Yamaha Banshee 350 airbox and carb rubber boots.  These are BRAND NEW OEM genuine factory Yamaha parts Brand new in the package, from our local Yamaha dealership They will fit any year Banshee 1987-2006.  These go between the air box and the carburetors.