This is a brand new VITO'S PERFORMANCE carburetor carb top cable adjuster This is the piece that screws into the cap on top of the factory stock OEM carb on the TORS delete kit, it adjusts the cable Fits all Yamaha Blaster 200 and Banshee 350 ATVS (Banshees will have to order 2 for a full replaceme

This is a set of BRAND NEW carburetor hoses from Vito's Performance These will fit any year Yamaha Blaster 1988-2006 This kit includes all the hoses you need, from the gas tank, all the way to the overflow drain These are a clear translucent blue color, very sharp, and flexible, and will not break

This is a set of BRAND NEW Vito's Performance T.O.R.S. system removal carb caps Works on the stock Mikuni carburetor, it removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Blaster 1988-2006 With these aftermarket carb caps the carb i

We have 1 left, then that's it since Sudco went out of business!   CUB PWK Keihin 39mm Carbs TRUE PWK Keihin 39m Carburetors  Authentic Keihin PWK 39mm Carburetor - Made in Japan - SUDCO Stock! Unleash your Yamaha Blaster's full potential with this genuine Keihin PWK 39mm ...

We have 1 left, then that's it since Sudco went out of business!  Banshee CUB PWK Keihin 41mm Carbs TRUE PWK Keihin 41m Carburetors NON AIRSTRIKER Authentic Keihin PWK 41mm Carburetor - Made in Japan - SUDCO Stock! Unleash your Yamaha Blaster's full potential with this genuine Keihin ...

This is a BRAND NEW Vito's Performance Yamaha Blaster carb rebuilt kit This includes everything to completely rebuild your 26mm Mikuni stock OEM carb Includes the exact items seen in the photos: bowl gasket, main jet, needle jet, seat, needle, orings, clips, springs, etc These will fit any year ...

This is a BRAND NEW carb choke lever from Vito's Performance Replaces OEM Part # 2GU-14171-00-00 This will only fit the Mikuni OEM factory stock carb, will not work for Keihin PWK carbs These will fit any year Yamaha Banshee or Blaster ...

This is a BRAND NEW Yamaha Blaster aftermarket larger carb 35mm kit Kit includes: 1 x 35mm Carb 1 x Vito's Performance thumb throttle cable 1 x K&N Style filter and clamp 1 x Outerwear pre filter 1 x JET kit with 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) 1 x ...

This is a BRAND NEW Yamaha Blaster 200 aftermarket larger carb 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the regular Keihin ...

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable This carb has the multi-color TITANIUM look to it Also has the upgraded billet aluminum choke lever The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable K&N style clamp-on filter JET kit including 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) The carb is not a Keihin brand carburetor, but it uses sta

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable UNI brand 2 stage clamp on filter JET kit including 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) The carb is not a Keihin brand carburetor, but it uses s

This is a BRAND NEW 28mm PWK style carb w/ vent lines The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable UNI brand 2 stage clamp on filter The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 34mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable K&N Style reusable air filter The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 34mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable K&N Style reusable air filter The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW 34mm PWK style carb w/ vent lines The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW Vito's Performance Oil Injection Billet aluminum block off plate These will fit any year Yamaha Blaster 1988-2006 This removes the UNRELIABLE oil injection system off of your Blaster, so you can pre-mix your own gas. If your factory system fails, your bike will have a ...

This is a BRAND NEW aftermarket swingarm bearing carrier rebuild kit for a Yamaha BLASTER 1988-2006 This kit includes the spacer collar, spacer tube, 2 bearings, and 2 dust seals This is ready to install on your BLASTER, and replaces all the internal parts of the carrier ...

This is a set of BRAND NEW Vito's Performance Oil Injection block off kit These will fit any year Yamaha Blaster 1988-2006 This removes the UNRELIABLE oil injection system off of your Blaster, so you can pre-mix your own gas. If your factory system fails, your bike will have a catastrophic (ie ...

This is a brand new Pair of (2) carburetor bowl gaskets (float chamber) They will fit a Yamaha Banshee or a Yamaha Blaster fits any year 1987-2006 This only fits the OEM factory stock Mikuni carbs (will not fit Keihin) Also fits other VM24 - VM26 carbs Replaces OEM: 304-14184-00-00

This is a BRAND NEW Vito's Performance Banshee idle screw Includes 1 brass idle screws with jamb nut to lock it into place so it will not back out This is a replacement idle screw for a carburetor that has been tapped for a TORS elimination kit These will fit any year Yamaha Banshee or Blaster 19

This is a pair of (2) Banshee carburetor rubber boot clamps These are genuine Yamaha OEM factory parts! New in packaging These are the clamps that connect the carbs to the intake boots on the cylinder Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster 1988-2004)

This is a set of BRAND NEW Vito's Performance T.O.R.S. removal system Works on the stock Mikuni carburetor, are removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Blaster 1988-2006 With the aftermarket carb cap the carb is much easie

This is a set of Vito's Performance standard size MAIN HEX JETS for a KEIHIN PWK or PJ carburetor 10 sizes included: 150 152 155 158 160 162 165 168 170 172 We use them for Yamaha Banshee and Blaster carbs mostly, but will work with any Keihin style carb - PWK PJ included Great complete set! Comes

This is a Banshee carburetor rubber boot clamp These are genuine Yamaha OEM factory parts! New in packaging These are the clamps that connect the carbs to the intake boots on the cylinder Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster 1988-2004)

This is a set of 4 BRAND NEW rear Yamaha Banshee or Blaster hydraulic disc brake rotor hub bolts from Vito's Performance Will fit on any year Yamaha Banshee, Blaster, Warrior, or Raptor 660 This includes all 4 bolts needed to install the rotor to the hub They already have Loctite applied to them, ...

This is ONE (1) brand new 2 stage UNI foam air filter These are 6" long, and fit any aftermarket carburetors 28mm - including Keihin or Mikuni PJ and PWK carbs This filter has a 10 degree angled neck so that the filters fit more level, and avoid the pipes better. Perfect for that 2:1 sing

This is a BRAND NEW Vito's Performance thumb throttle carburetor cable Works on the stock factory OEM Mikuni carburetor that has had the TORS removed (Will not work with stock TORS) This will also fit a Keihin PWK 28 29 30 32 33 34 or 35mm carb as well These will fit any year Yamaha Blaster 1988-2

This is ONE (1) brand new 2 stage UNI foam air filter These are 6" long, and fit any aftermarket carburetors 33mm or 34mm or 35mm - including Keihin or Mikuni PJ and PWK carbs Perfect for that 2:1 single carb setup on your Banshee, or 250R WILL NOT FIT STOCK BANSHEE or BLASTER CARBS! We have ones t

This is ONE (1) brand new K&N style air filter These are 6" long, and fit any aftermarket carburetors 28mm - including Keihin or Mikuni PJ and PWK carbs Perfect for that 2:1 single carb setup on your Banshee, or 250R WILL NOT FIT STOCK BANSHEE / BLASTER CARBS! We have ones that will in our othe

This is a BRAND NEW Yamaha Blaster airbox lid kit This is a genuine factory OEM Yamaha product from our local Yamaha dealership This includes:  OEM Yamaha lid / cover OEM Yamaha snorkel Vito's Performance clamp Fits any year Yamaha Blaster: 1988-2006 Ready to ...

This is a brand new VITO'S PERFORMANCE carburetor carb top cable adjuster This is the piece that screws into the cap on top of the factory stock OEM carb on the TORS delete kit, it adjusts the cable Fits all Yamaha Blaster 200 and Banshee 350 ATVS (Banshees will have to order 2 for a full repla

This is ONE (1) brand new 2 stage UNI foam air filter These are 6" long, and fit any aftermarket carburetors 35mm or 36mm or 37mm or 38mm - including Keihin or Mikuni PJ and PWK carbs Perfect for that 2:1 single carb setup on your Banshee, or 250R WILL NOT FIT STOCK BANSHEE or BLASTER CARBS! We hav

This is a BRAND NEW Yamaha Blaster airbox intake tube duct joint This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006 Ready to ...

This is a BRAND NEW Yamaha Banshee lower a-arm bushing replacement kit Fits any Yamaha Banshee 1991-2006, Raptor 700, Raptor 660, or YFZ450, Blaster, Warrior, etc (see list below) Includes enough to do TWO (2) lower a-arms - both LEFT AND RIGHT: 4 x Bolt tube 8 x Bushings 8 x Dust caps We have ...

This is a BRAND NEW Yamaha Blaster airbox lid This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006   Ready to ...

This is a BRAND NEW Yamaha Banshee lower a-arm bushing replacement kit Fits any Yamaha Banshee 1991-2006, Raptor 700, Raptor 660, or YFZ450, Blaster, Warrior, etc (see list below) Includes enough to do ONE (1) lower a-arm - either LEFT or RIGHT: 2 x Bolt tube 4 x Bushings 4 x Dust caps We have ...

This is ONE (1) brand new K&N style air filter + outerwear These are 6" long, and fit any aftermarket carburetors 28mm - including Keihin or Mikuni PJ and PWK carbs Perfect for that 2:1 single carb setup on your Banshee, or 250R WILL NOT FIT STOCK BANSHEE / BLASTER CARBS! We have ones that will

This is TWO (2) brand new K&N style air filters These are 6" long, and fit any aftermarket carburetors 28mm - including Keihin or Mikuni PJ and PWK carbs Perfect for that 2:1 single carb setup on your Banshee, or 250R WILL NOT FIT STOCK BANSHEE / BLASTER CARBS! We have ones that will in our oth

This is a BRAND NEW Yamaha Blaster airbox lid snorkel + clamp This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006 Ready to Install Also includes a Vito's Performance clamp!  ...

This is a BRAND NEW Yamaha Blaster airbox lid snorkel This is a genuine factory OEM Yamaha product from our local Yamaha dealership Fits any year Yamaha Blaster: 1988-2006 Ready to ...

This is a BRAND NEW Vito's Performance oversized intake airbox boot for your Yamaha Blaster This is designed to use an oversized 33mm or 35mm carb on your Blaster and still use the factory airbox/rear fender uncut. Fits any year Yamaha Blaster: 1988-2006 This 2 piece unit is made of 3D printed ...