This is a brand new Yamaha Banshee swingarm bearing kit + swingarm bolt by Vito's Performance complete with Pivot tube, 2 x needle bearings, 2 x dust seals, and 2 x dust caps, swingarm main bolt, washer, and nut The rear pivot tube is what the swingarm bolt slides into; it is very common for these

This is a BRAND NEW custom chromoly swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swi

This is a BRAND NEW custom chromoly swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swi

This is a BRAND NEW custom chromoly swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swi

This is a BRAND NEW custom chromoly swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swi

This is a BRAND NEW custom chromoly swingarm done by TYSON RACING This model is shorter than stock by NEGATIVE -2" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swingarms

This is a BRAND NEW Yamaha Raptor 660 or Yamaha YFZ450 swingarm pivot bolt, nut, and washer by Vito's Performance This is the bolt that goes through the frame and hold the swing-arm to the frame. It is very common for these to seize up inside the bushing tube Ready to install in any year YFZ 450 c

This is a BRAND NEW custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swingarms an

This is a BRAND NEW custom swingarm done by TYSON RACING This model is STOCK LENGTH - uses the factory carrier This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swingarms and

This is a BRAND NEW custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +10" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swingarms a

This is a BRAND NEW custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swingarms an

This is a BRAND NEW custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swingarms an

This is a BRAND NEW custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Made from CHROMOLY steel, very light, and very strong Tyson Racing has been making swingarms an

This is a BRAND NEW Yamaha Banshee swingarm pivot bolt, nut, and washer by Vito's Performance This is the steel bolt that goes through the frame and holds the swingarm onto the frame Ready to install in any year Yamaha Banshee 350 1987-2006. Replaces OEM Yamaha part #: 2GU-22141-00-00 , 90201-2

This is a BRAND NEW Honda 400EX + TRX450R swingarm pivot bolt, nut, and washer by Vito's Performance This is the big bolt that goes through the frame and holds the swingarm onto the frame Ready to install in any year Honda 400EX 1999-2008, or 450R 2004-2014 Replaces OEM HONDA part #: 90121-HN1-00

This is a BRAND NEW Yamaha Blaster swingarm pivot bolt, nut, and washer from Vito's Performance. This is the steel bolt that goes through the frame and holds the swingarm onto the frame Ready to install in any year Yamaha Blaster 200, Raptor 125, or Raptor 250

This is a BRAND NEW Yamaha Banshee swingarm pivot bolt, nut, and washer from Vito's Performance This is the HEAVY DUTY VERSION, due to increased complaints about the bolt not being strong enough, this was produced with a SOLID CORE There is no center drilled out, so the strength is much stronge

This is a brand new Yamaha Banshee swingarm bolts washer kit by Vito's Performance These are the 2 spacers plates that go next to the dust caps to space your swingarm correctly These washers are required to get your swingarm to properly line up It's ready to install in any year Yamaha Banshee

This is a pair of BRAND NEW Yamaha Banshee swingarm pivot bolt inserts by Vito's Performance These go into your swingarm, and replace the factory bearings and bolt sleeve Lighter, and much easier to work with - Highly recommended Made from carbon fiber material, these are lightweight, strong LIFETI

This is a complete rebuilt kit for the front of your Honda TRX 400 400EX 400X rear swingarm by Vito's Performance All brand new, ready to install on any year Includes: Swingarm bolt + washer and lock nut 2 Needle Bearings 2 Dust caps 2 Aluminum bushing sleeve spacers 2 Seals 2 Bushing sleev

This is a BRAND NEW Honda TRX450r swingarm pivot bolt and nut This is a genuine OEM factory HONDA part This is the steel bolt that goes through the frame and holds the swingarm onto the frame Ready to install in any year Honda 450r TRX450 TRX450r 450r or TRX450ER 2004-2014

This is a BRAND NEW drag racing lightweight CHROMOLY a-arm setup for your Yamaha Banshee by Tyson Racing This kit includes 2 single arms This is -2 inches narrower (minus 2) than the factory setup It also places the a-arms +5 inches forward for better weight distribution This is set up with 5/8 s

This is a BRAND NEW drag racing lightweight CHROMOLY a-arm setup for your Yamaha Banshee by Tyson Racing This kit includes 2 single arms This is -2 inches narrower (minus 2) than the factory setup It also places the a-arms +2 inches forward for better weight distribution This is set up with 5/8 s

Beware of the cheap imitators! Many of them use the smaller diameter rollers that only last half as long, and sometimes they don't even touch the chain or guide it into place after they wear just a little bit! Get these thicker ones, the same 42mm size as OEM! You need meat on them bones! This is ...

This is a BRAND NEW Vito's Performance swingarm chain guide kit Includes: 1 x front chain slider 1 x rear chain guide 2 x Chain rollers with bearings and mounting bolts (upper and lower) Will fit any year Yamaha Banshee rear swing arm 1987-2006. This is made of long lasting high density

This is a brand NEW Vito's Performance YAMAHA upper and lower lower a-arm mounting bolt kit

Beware of the cheap imitators! Many of them use the smaller diameter rollers that only last half as long, and sometimes they don't even touch the chain or guide it into place after they wear just a little bit! Get the thicker ones, same 42mm size as OEM! You need meat on them bones! This is a ...

This is a BRAND NEW custom swingarm done by TYSON RACING fits: HONDA 250 250r TRX250 atvs, as well a three wheeler ATC 250r This is the SOLID FRONT style, 1988-1989 style. The 86-87 had a split front, we do sell those in our other listings This model is +12" longer than stock This accepts the ROUND

This is a BRAND NEW HONDA 450 450r custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighter and stronger than

This is a BRAND NEW factory OEM clutch actuator arm + bearing + seal kit This is a OEM Yamaha unit, brand new from local dealership Ready to install on any year Yamaha Banshee 1987 - 2006

This is a BRAND NEW HONDA 400EX TRX400EX custom swingarm done by TYSON RACING fits any year 1999-2004 This model is extended +2" longer than stock This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighter

This is a BRAND NEW HONDA 450 450r custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +10" This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighter and stronger than

This is a BRAND NEW HONDA 400EX TRX400EX custom swingarm done by TYSON RACING fits any year 1999-2004 This model is extended +4" longer than stock This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighter

This is a BRAND NEW HONDA 400EX TRX400EX custom swingarm done by TYSON RACING fits any year 1999-2004 This model is extended +6" longer than stock This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighter

This is a BRAND NEW HONDA 450 450r custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighter and stronger than

SAHONDA4508B Tyson Racing Tyson Racing Honda 450R Swingarm And Inserts Round Style Tags: This is a BRAND NEW HONDA 450 450r custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon i

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

This is a BRAND NEW custom swingarm done by TYSON RACING fits: HONDA 250 250r TRX250 atvs, as well a three wheeler ATC 250r This is the SOLID FRONT style, 1988-1989 style. The 86-87 had a split front, we do sell those in our other listings This model is +6" longer than stock This accepts the ROUND

This is a BRAND NEW HONDA 400EX TRX400EX custom swingarm done by TYSON RACING fits any year 1999-2004 This model is extended +10" longer than stock This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighte

This is a BRAND NEW HONDA 450 450r custom swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This accepts the ROUND STYLE BEARING CARRIER This model also includes the carbon inserts for the swingarm bolt This is made from chromoly steel, lighter and stronger than

This is a MUST HAVE screw kit for your bikes carburetor float bowl. These stainless Allen head bolts will make jetting your ride much easier They will not strip out like the cheap stock Phillips Head screws that come stock on your bike. You can remove and install these bolts many times with no worr

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +0" - STOCK LENGTH This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing ha

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +10" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +12" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

This is a BRAND NEW custom swingarm done by TYSON RACING fits: HONDA 250 250r TRX250 atvs, as well a three wheeler ATC 250r This is the SOLID FRONT style, 1988-1989 style. The 86-87 had a split front, we do sell those in our other listings This model is +0" longer than stock - stock length This acc

This is a BRAND NEW custom swingarm done by TYSON RACING fits: HONDA 250 250r TRX250 atvs, as well a three wheeler ATC 250r This is the SPLIT FRONT style, 1986-1987 style. The 88-89 had a connected front - we can make that as well by request This model is +10" longer than stock This accepts the ROU

This is a BRAND NEW custom swingarm done by TYSON RACING fits: HONDA 250 250r TRX250 atvs, as well a three wheeler ATC 250r This is the SPLIT FRONT style, 1986-1987 style. The 88-89 had a connected front - we can make that as well by request This model is +12" longer than stock This accepts the ROU